Instructions for installing SmartShell on gaming stations with a diskless solution
-
Boot the master boot image ﴾gold boot image﴿, install the Shell on it and make sure that after rebooting, there is a connection with the server.
The "Online" status in the Shell and the "Turned on" status in the Admin panel indicate a successful connection with the server.
- Deactivate the shell on this PC, for this:
- Press CTRL+ALT+P combination;
- Enter the high access password;
- Click on “Deactivate Shell”.
- Save the master-image.
- Boot this image on the next gaming station.
- Install the Shell via the installer.
-
Run the Shell, make sure that connection with the server is established, the number you specified is assigned and the operation status is "Online".
- If there are no problems, repeat the action for each PC.
- Activate the shell in the Master boot image, then save it.
If you have any questions during the installation – contact us in the technical support chat.